Saltwater-Proof Rubber Water Bar for Harbor and Dock Projects

• Customization: Available
• After-sales Service: 3 Year
• Application: Indoor, Outdoor, Basement, Concrete Joint Waterstop, Waterproofing
• Model NO.: PZ3030
• Certification: CE, ISO, ISO9001
• Shape: Roll
• Type: Solid Core Sealing Strip
• Sectional Shape: Rectangle
• Performance: High Pressure
• Standard: Standard, Nonstandard
• Material: Rubber
• Usage: See Description
• Customized: Yes
• Color: Black/Red
• Volume Expansion: 150%-400%
• Hardness: 30-90 Shore
• Sample: Free Sample
• Project Solution Capability: Graphic Design, 3D Model Design, Total Solution Fo
• Main Material: Rubber
• Surface Treatment: Extruding
• Transport Package: Carton with Pallet
• Specification: 20*30, 10*10, 10x20, 20*25, or as requirement
• Origin: Jiangsu, China
• HS Code: 4016931000
• Production Capacity: 50000 Meters Per Week
• Package Size: 38.00cm * 38.00cm * 18.00cm
• Package Gross Weight: 25.000kg
• Lead Time: 7 days (1 - 1000 Meters) ; To be negotiated ( > 1000 Meters)

Product Description

High performance hydrophilic waterstops for use with fresh and sea water

Swelling Waterstop is a hydrophilic synthetic elastomeric rubber waterstop that uses swelling pressure to seal concrete constructionjoints and penetrations to stop water in the most extreme conditions. It has superior performance that swells up to 10x its original sizeand up to 4x more than competing bentonite and rubber swelling waterstops. For use with regular ground water, salt and sulfate contaminatedwater.It is extremely durable and will not deteriorate over time. It can be used by itself as a single protection waterstop or with othercomponents of Waterstop System as a double or triple protection for construction joints and penetrations.

Product Description

FEATURES & BENEFITS

High-performance swelling up to 10x original volume
Flexible and easy to install
Resistant to high hydrostatic pressure
Extremely durable – will not deteriorate even with repeated wetting and drying cycles
Innovative trapezoid shape resists dislodgement and allows better concrete consolidation
Controlled swelling allows for concrete strength development in advance of swelling pressure

Suitable for use in salt water environments.

Permaseal Waterstop swells by approx. 450%. 

Composition delays initial swelling allowing installing toinsitu concrete applications.

Easy installation, nailing or gluing with Perma Adhesive.

Has a good all-around chemical resistance 

Good impact resistance.
Retains is form in multiple dry and wet cycles

Specification

PROPERTIES
Physical Properties
Appearance	Red,trapezoid,flexible rubber strip
Dimensions	5 x 20mm (approximately .2” x .8”),can be customized
Density	1.2 - 1.25 g/cm
Hardness (Shore A)	24 +/- 3
Tensile Strength	>435 psi (3 MPa)
Performance Properties
Swelling Performance – Clean Water	≥ 1000%
Swelling Performance – Concrete Water (high pH)	≥ 800%
Swelling Performance – Salt Water (3%)	≥ 300%
Water Pressure Resistance (Modified Din 1048-5)	≥ 0.8 MPa
Hardened Properties
Hydrostatic Head Resistance	0.8 MPa (265 ft)

RECOMMENDED USES

Use Swelling Waterstop to permanently waterproof horizontal or vertical construction joints, pipe penetrations, between precastelements and other concrete joints. Not for use at expansion joints. Suitable for use in sewage and containment structures. May be used inareas with chloride or sulfate contaminated soils and in contact with sea water.

INSTALLATION NOTES
Easy to install where conventional waterstops would require complex fitting.
Fix in position using adhesive or masonry nails at regular intervals.
A suitable adhesive should be used to fix the seal to metal or PVC pipe surfaces.
On irregular surfaces ensure that direct contact is made between the seal and the substrate along the entire section.
The seal can be exposed to wet site conditions for up to 3 days prior to the placing of concrete, provided it has been coated with an inhibitor to protect it.
A minimum of 70mm of concrete is required on all sides to encapsulate the seal within the concrete.
Joints can be secured by welding, glueing or overlapping.
Swelling is slower in cold conditions and faster in hot.
Typically 28 days to reach full swell in Standard Swell Waterstop.

APPLICATION

Before using this product, refer to Application Instruction.
Basic Application Procedure: Using Adhesive, or other approved fastening device, adhere  Swelling Waterstop at or near thecenter of the construction joint to clean dry concrete surface. For added long-term protection of the outboard reinforcing steel, apply Waterstop Treatment to the concrete surface first and adhere to the treatment when it is dry. Strip-ends should be tightly butted andnot overlapped. Avoid rain or immersion in water as this may cause premature swelling. If premature swelling occurs, dry the sufficiently to restore its original dimensions and ensure material is properly affixed to the surface before pouring concrete.

Company Profile

Suzhou ARISONS New Material Co.,Ltd.

ARISONS is a professional Rubber&Construction manufacturer in China. The factory is located in Jiangsu, closed to Shanghai. After 15 years of development, it has a mature production system, a professional engineering team, a quality inspection department and a strong production line, providing a one-stop design scheme and product design for customers in many countries.

Our main products are rubber sealing products, pipe sealing ring, car sealing ring, etc., water treatment equipment, aeration pipe, aeration disk, large pipe machine, driving, etc., we pay attention to quality, and will make different solutions according to different customers, provide the cheapest price, achieve the most perfect effect, has reached more partners for customers, look forward to cooperation with you!

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in Blank Cartons. We privode carton LOGO print service after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before after receive the copy of B/L. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?
A: We accept FOB,CIF,CNF,DDP,DDU,LC.etc

Q4. How about your delivery time?
A: Generally, it will take 7 to 10 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.

Q6. What is your sample policy?
A: We can supply the sample for free, client only need to pay the delivery cost.