Pond Vertical Turbine Pumps Rubber Aeration Diffusers Air Soft Tubes

• Customization: Available
• Warranty: 1 Year
• Type: Diffuser
• Model NO.: 50
• Method: Biological Treatment
• Usage: Industrial, Agriculture
• Material: Nano Microporous
• Meter Heavy(G/M): 115
• The Air Flow: 3-12 Cubic Meters/Hrm
• Bubble Diameter: 0.5-2mm
• Dynamic Power: 02 / Kw. Hr
• Packing Size: 62*62*32cm
• Application: Fish Pond Aeration
• Length: 100/200m
• Packing Quantity: 200meters/Roll
• Application Water Depth: 0-5meters
• Packing Weight: 23kgs
• Transport Package: Carton Packing
• Specification: 16mm
• Origin: Jiangsu, China
• HS Code: 4009310000
• Production Capacity: 500000 Meters Per Month

Product Description

High Performance Micro Nano Bubble Aquarium Air Aeration Soft Tube

 

Product Description

 

The micropore rubber bubble diffuser aeration hose for aquaculture  is specially designed to create fine bubbles that rise slowly in the water.  These fine bubbles have higher surface area which remain in the water for longer periods, such kind of aerator is anti-blocking, anti-corrosive and anti-aging, enabling more efficient oxygen transfer into the water. All you need is an efficient clean air blower.

Super microporous aeration by new micro molecular material tube, atomization effect ranked first in all types of aeration tube, Its working principle is: by air compressor pump pressure, so that uniform aeration tube to expand and reach the design value, A lot of air bubbles (diameter: 20 ~ 30um) coming out from the wall, in the water in the smoke state, Rise very slowly, dissolved oxygen effect is remarkable, to dramatically improve the oxygen content in the water, Increasing the mobility of water, improve the density of aquaculture.

Applicable water depth	0-5 meters,Cold resistance(-40°C,8h)
Cold resistance(-40°C,8h)	Tensile length ≥2.2 Mpa Tensile elongation ≥130 percent
Hot empty aging (70°C 72h)	Tensile strength rate ≤20 percent Break elongation rate ≤20 percent
Resist 5% NaOH (23°C 72h)	Tensile strength rate ≤20 percent Break elongation rate ≤20 percent
Resist 5% HCl (23°C 72h)	Tensile strength rate ≤20 percent Break elongation rate ≤20 percent

Basic Info
--------------------------------------------------------------------------

 

Technical Parameters:

 

NO.	Technical index item		Index	Remarks
1	Specification		D-16
2	Inner diameter(mm)		10±1mm
3	Outer diameter(mm)		16±1mm
4	The average pore diameter of micropore(mm)		Φ0.012 ~φ0.03
5	Microporous layout density(pc/m)		600 ~ 1400
6	Apparent density (g/cm^3)		0.50~0.70
7	Bubble diameter(mm)	Freshwater	0.2~ 1	According to the water viscosity and water level has a certain change.
		Seawater	0.08~3
8	Effective aeration(m^3 / min.m)		0.02 ~ 0.045
9	Air flow(m^3/ h.m)		0.1~ 0.4
10	Service area(m^2 / m)		0.8~ 5
11	Matched power		1Kw motor power> 200m microporous aeration tube

Product Advantages

1.Reduce energy cost by up to 75%

2.Lack of moving parts provides a very low
3.Maintenance alternative
4.Maintains higher dissolved oxygen(DO) levels
5.Allows for higher stocking densities
6.Allows for higher feeding rates
7.Allows for more frequent feedings
8.Faster growth and reduced FCR
9.Low start up cost
10.Low replacement cost
11.Reduce algal blooms

Products picture
--------------------------------------------------------------------------





ABOUT US
--------------------------------------------------------------------------


ARISONS is a professional Rubber&Construction manufacturer in China. The factory is located in Jiangsu, closed to Shanghai. After 15 years of development, it has a mature production system, a professional engineering team, a quality inspection department and a strong production line, providing a one-stop design scheme and product design for customers in many countries.

Our main products are rubber series products, bubble diffuser, water treatment equipment, aeration pipe, aeration disk, large pipe machine, driving, etc., we pay attention to quality, and will make different solutions according to different customers, provide the cheapest price, achieve the most perfect effect, has reached more partners for customers, look forward to cooperation with you!

Q1. What is your terms of packing?
A: Generally, we pack our goods in Blank Cartons. We privode carton LOGO print service after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before after receive the copy of B/L. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?
A: We accept FOB,CIF,CNF,DDP,DDU,LC.etc

Q4. How about your delivery time?
A: Generally, it will take 7 to 10 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.

Q6. What is your sample policy?
A: We can supply the sample for free, client only need to pay the delivery cost.